News
NEWS
Information Details
Matters needing attention when dispensing nylon glue with glue dispensing machine
Release time:
2024-04-25 14:56
As a kind of precision liquid packaging equipment, glue packaging machine has been widely used in chemical, pharmaceutical, food and other industries. When dispensing nylon glue, a special material, the operator needs to be more cautious, because the physical and chemical properties of nylon glue are different from other liquids, which may affect the normal operation of the equipment and the quality of the glue product. Below, this article will introduce in detail several aspects that the glue dispenser needs to pay attention to when dispensing nylon glue.
1. Device Selection and Configuration
First of all, it is necessary to ensure that the selected glue dispensing machine is suitable for dispensing nylon glue. Nylon glue usually has a certain viscosity and corrosion, so the material and sealing of the equipment need special attention. It is recommended to use equipment made of corrosion-resistant and wear-resistant materials, such as stainless steel or special alloys, to ensure the durability and stability of the equipment. At the same time, the sealing system of the equipment needs to be tight and reliable to prevent the leakage of nylon glue from causing harm to the environment and operators.
Preparation before 2. operation
Before dispensing nylon glue, the equipment needs to be fully inspected and debugged. First of all, make sure that all parts of the equipment are installed in place and the fasteners are not loose. Secondly, check whether the electrical system of the equipment is normal, and whether the switches, buttons, and indicator lights are working properly. In addition, it is necessary to check whether the sensor and control system of the equipment are accurate and reliable to ensure that the equipment can be divided according to the set parameters.
Precautions in 3. sub-packaging process
1. Temperature control:
The viscosity of nylon glue will change with the change of temperature, so it is necessary to strictly control the temperature during the dispensing process. It is recommended to store the nylon glue in a constant temperature and humidity environment, and set up temperature monitoring devices at the inlet and outlet of the equipment to detect and deal with abnormal situations in time.
2. Pressure control:
The fluidity of nylon glue is affected by pressure, so it is necessary to control the pressure during the sub-packaging process. It is recommended to set the pressure parameters of the equipment reasonably according to the characteristics of nylon glue and the requirements of sub-packaging, and pay close attention to the pressure changes during the sub-packaging process for timely adjustment.
3. Measurement accuracy:
In order to ensure the accuracy of the sub-packaging, the metering system of the equipment needs to be calibrated regularly. It is recommended to use standard measuring instruments to calibrate the equipment and keep the calibration records after calibration for future reference.
4. Prevention of foam:
When nylon glue is repacked, a large amount of foam may be generated, which will affect the quality and efficiency of repacking. In order to prevent the generation of foam, it is recommended to add an appropriate amount of defoamer into the mixing system of the equipment, and control the mixing speed during the packaging process to avoid excessive mixing to produce foam.
5. Clean and hygienic:
Nylon glue easily adheres to the surface of the equipment, forming dirt that is difficult to clean. In order to keep the equipment clean and hygienic, it is necessary to clean and disinfect the equipment regularly. It is recommended to use a special cleaning agent to clean the equipment and rinse it thoroughly with water after cleaning. For some parts that are difficult to clean, you can use professional cleaning tools for cleaning. At the same time, in order to prevent cross-contamination, it is recommended to use sterile isolation agents for isolation between cleaning equipment.
Maintenance after 4. operation
After completing the task of dispensing nylon glue, the equipment needs to be maintained and maintained in time. First of all, a comprehensive inspection of the equipment should be carried out to find and deal with possible problems. For example, check whether the sealing system of the equipment is leaking, whether the electrical system is normal, and whether the metering system is accurate. Secondly, the equipment should be cleaned and disinfected to remove the residual nylon glue and dirt. Finally, the equipment should be lubricated and maintained to extend the service life of the equipment and improve the stability of the equipment.
Previous Page
Next Page
Previous Page
Next Page
Latest developments
National unified service hotline
Contact Us
Contact:+86769-81515830
Company E-mail:mako-168@dgxzrdz.com
Company E-mail:eudora@dgxzrdz.com
Miss Wang:+86134-1232-0139
Company address: Dongguan City, Guangdong Province
Shunsheng Building, No.2, Guo Wu River Side Road
Sweep to identify concerns:
Scan code attention consultation
Copyright©2024 Dongguan Xiangzhirui Electronics Co., Ltd.
Technical Support:www.300.cn SEO
SAF Coolest v1.3.1.2 设置面板 DYFSD-ZRQQ-DXZSE-AES
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page